您当前的位置:首页 > 产品中心 > 美国ChemInstruments仪器

HLC-101 热融胶涂布机

HLC-101 热融胶涂布机
产品编号:HLC-101
浏览数
产品简介:ChemInstruments 公司的HLC-101实验室热融胶涂布机能让你在实验室快速的涂布出精密稳定的 热融胶涂布样品。

详细介绍

Hot Melt Laboratory Drawdown Coater

For the quick and easy application of elevated-temperature or hot melt coatings, the Hot Melt Laboratory Drawdown Coater creates consistently coated samples from roll stock. The heart of this coater is its two precision ground, 303 stainless steel rolls, which provide for a precise knife-over-roll coating method. The Hot Melt Laboratory Drawdown Coater simplifies producing an accurate hot melt coating on longer webs for product development or QC applications. Paired up with our Benchtop Laboratory Laminator, this coater is the starting point to creating high quality hot melt label samples.

ChemInstruments 公司的HLC-101实验室热融胶涂布机能让你在实验室快速的涂布出精密稳定的 热融胶涂布样品。

设备特点

涂布宽度300mm, 长度无限

速度:手拉

涂布方式:two roller type

长码数涂布之小型量产机

恒温胶槽 最高可保持204°C,

可加热融解热融胶,也可预先融好再加入

特制之厚度调整机制,可精密快速调整上胶量,从 25 g/M2到 1,500g/M2

使用叁支500 watts的电热棒,溶解胶槽以及控制稳定的涂胶

胶槽和涂布头各有独自之PID电子温度控制器,精密控制温度到 ±1°C

两支精密不銹钢棒涂头,横向厚度精密稳定控制

铁氟龙挡胶板,涂布宽度70mm到300mm, 长度无限

含捲出架,胶槽及塗头

胶槽最大容量125g

叁组温度控制

阳极硬化处理过之铝架构,涂布铁氟龙

选购品:3"管气动夹头,附煞车机制,线条胶涂布用之塞片

尺寸:

     本体        控制箱        

高   46 cm       23 cm

宽   41 cm       41 cm

深   46 cm       23 cm

重  19 公斤      8 公斤